Hydraulic hand pump, 700 bar, with high pressure hose - 00040

This hydraulic pump is suitable for single-acting hydraulic cylinder, etc.
In the small image placed on the upper right corner of the product picture, the pressure connections of pump and cylinder are displayed. The matching cylinders from our product range have the same small image in their product picture. This way the matching cylinders are easily recognisable.

Technical data:

Max. pressure:          700 bar

Tank - oil volume:      350 cm³

Dimensions: Length: 340 mm, width: 100 mm, height: 125 mm

High-pressure hose (0.8 m long) is included in the scope of delivery!

Colour depending on delivery: yellow or turqouise. Then the design differs marginal, too.

Shipping weight: 11 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.

Hydraulic pump with pneumatic drive and foot pedal, 590 bar, 1000 cm³ oil tank volume - 00048

This hydraulic pump is suitable for single-acting hydraulic cylinders etc.
The pump is equipped with a pneumatic engine which completely does the pumping work.
The compressor can be connected to the high pressure hose, as seen on the product picture.
When the button located at the end of the hose is pressed, the pneumatic engine pushes the oil to a connected hydraulic device (e.g. hydraulic cylinder) with a pressure of up to 590 bar.
The air hose (1.3 m) with push button is included in the scope of delivery!

Technical data:

Max. pressure:       590 bar

Tank - oil volume:   1000 cm³

Dimensions: length: 580 mm, width: 220 mm, height: 220 mm

Colour may vary depending on delivery: black or blue

Weight:                    12 kg
Shipping weight:      13 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.

Hydraulic pump with pneumatic drive and manual lever, tank capacity: 2.2 litres - 00395

With pneumatic drive, additional operation by hand is possible, 550 bar
This hydraulic pump is equipped with a pneumatic drive which does the whole pumping work. A compressor can be connected to the air hose at the intended connection at the end of the hose.
Only the switch at the end of the hose must be pressed and the pneumatic drive pumps the oil to a connected hydraulic device (such as hydraulic cylinders) with up to 550 bar.

You can pump the hydraulic system by hand, too. The corresponding device is attached to the pump.
This pump is a new replacement part for large hydraulic presses, so a hand pump lever is not included. A rod with a diameter of 23 mm can be used for this purpose.
For lowering you only have to open one valve and the oil flows back into the hydraulic pump.
This hydraulic pump is suitable for single-acting hydraulic cylinder, etc.
The device has four threaded holes by which the whole unit can be fixed to e.g. a hydraulic press.
A connection for a hydraulic hose is located at the back of the housing (see brass-coloured 90° angle piece in the photo)

Technical data:

Max. pressure:                                       550 bar

Tank - oil volume:                                   2200 cm³

Oil output rate at 8 bar air pressure: 130 cm³/min at high pressure

Oil output rate at 8 bar air pressure: 500 cm³/min at low pressure

Dimensions without hose:

Height:                                                     510 mm

Width:                                                      160 mm

Depth:                                                      160 mm

The compressed air hose is included in the scope of delivery 

In the additional photo this hose is depicted with a 90° angle piece which is not included.
The hose also goes down vertical (as seen in the large photo). 

Weight:                                                      14 kg
Shipping weight:                                        17 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.

2 stage hydraulic hand pump, hydraulic pump, 700 bar, with high-pressure hose, oil volume: 2.3 litres - 00045

This hydraulic pump is suitable e.g. for single-acting hydraulic cylinders etc.
The high-pressure hose (2 m long) is included!
In the small image placed on the upper right corner of the product picture, the pressure connections of pump and cylinder are displayed. The matching cylinders from our product range (always yellow or turquoise) have the same small image in their product pictures. This way the matching cylinders are easily recognisable.

Technical data:

Max. pressure:               700 bar

Tank - oil volume:            2.3 litres

Max. outlet pressure:      low pressure: 20 bar

                                        high pressure: 700 bar

Amount of oil per stroke: low pressure: 13 cm³ per stroke

                                        high pressure: 2.3 cm³ per stroke

Dimensions:                    length: 510 mm, width: 140 mm, height: 155 mm

Colour may vary depending on delivery (yellow or turquoise).

Shipping weight:              14 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.

Hydraulic hose, high pressure hose, pressure hose - 00532

Technical data:

Total length: 200 cm

One connection end has an external thread with 3/8"-19. The other end of the hose has a the male part of a quick coupling (just like our yellow/turquoise hydraulic pumps).
You can find the counterpart to this quick coupling also in our shop.

Weight:               1.5 kg
Shipping weight: 2.5 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.

Quick coupling adapter, female - 00583

The fitting counterpart of this adapter can be found in our shop. (Art.No. 00582)

Technical data:

Connection thread of the outer thread: 3/8"-19

Weight:            0.2 kg
Shipping weight: 1 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967 .
Customer pickup is possible after consultation.

Quick coupling adapter, male - 00582

The fitting counterpart of this adapter can be found in our shop.

Technical data:

Connection thread of the inner thread: 3/8"-19

Weight:            0.2 kg
Shipping weight: 1 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.

Set: Hydraulic quick coupling adapters, female and male connector - 00581

In the photo, both parts are already connected.

Technical data:

Connection thread of the outer and inner thread: 3/8"-19

With the union nut, you can combine these two quick coupling adapters

Weight:            0.4 kg
Shipping weight: 1 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.

T-piece quick coupling: 2 x female and 1 x male adapter - 00580

Suitable for all yellow and turquoise hydraulic cylinders and hydraulic pumps in our shop. Extension hoses, connection hoses and additional single quick coupling adapters are available in our shop, too. So you can extend hoses and e.g. connect multiple cylinders to a pump.

Technical data:

Connection thread of the t-piece: 3 x internal thread 3/8"– 19

The three quick coupling adapters are screwed into the t-piece as seen in the photo.

Weight: 0.4 kg
Shipping weight: 1 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.

Hydraulic pump with pneumatic drive and lever, tank volume: 1 litre - 00667

With pneumatic drive, additional operation by hand is possible, 500 bar

This hydraulic pump is equipped with a pneumatic drive which does the whole pumping work. A compressor can be connected to the air hose at the intended connection at the end of the hose.
Only the switch at the end of the hose must be pressed and the pneumatic drive pumps the oil to a connected hydraulic device (such as hydraulic cylinders) with up to 500 bar.
You can pump the hydraulic system by hand, too. The corresponding device is attached to the pump.
This pump is a new replacement part for large hydraulic presses, so a hand pump lever is not included. A rod with a diameter of 22 mm can be used for this purpose.
For lowering you only have to open one valve and the oil flows back into the hydraulic pump.
This hydraulic pump is suitable for single-acting hydraulic cylinder, etc.
The device has four threaded holes by which the whole unit can be fixed to e.g. a hydraulic press.
A connection for a hydraulic hose is located at the back of the housing

Technical data:

Max. pressure:                                  500 bar

Tank - oil volume:                              1000 cm³

Oil output rate at 8 bar air pressure: 130 cm³ / min. at 500 bar

Oil output rate at 8 bar air pressure:  500 cm³ / min. at 0 bar

Dimensions:                                        height: 475 mm, width: 160 mm, depth: 120 mm

The compressed air hose is included in the scope of delivery!

Weight:                                                      8 kg
Shippimng weight:                                10.5 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967
Customer pickup is possible after consultation.