Hydraulic foot pump, operation by foot rocker 1600cm³, oil tank, HA2, 00839

Hydraulic pump with pneumatic drive, operation via foot pedal, 690 bar - 00839

This hydraulic pump is equipped with a pneumatic engine which completely does the pumping work. A compressor can be connected to the compressed air connector seen on the picture.
Step on the lower part of the foot rocker on top of the pump and the pneumatic engine now presses the oil with up to 690 bar into a hydraulic attachement (e.g. a hydraulic cylinder).
For lowering, step on the upper part of the foot rocker, in order to let the oil flow back in the hydraulic pump.
This hydraulic pump is suitable for single-acting hydraulic cylinders, etc.

Technical data:

Max. pressure:                                                 690 bar
 
Tank - oil volume:                                             1600 cm³

Oil discharge flow at normal pressure:             180 cm³/min (at 690 bar)

Oil discharge flow withput load:                         810 cm³ / min

Operating pressure of compressed air engine:  from 6.9 bar up to 8.2 bar

Connecting thread for compressed air engine:  1/4" (common standard thread)

Connection (inner thread) for oil output:             3/8"-18 NPT

An adaptor is included in the scope of delivery to reduce vom 3/8"-18 NPT to 1/4"

Dimensions:                                                         length 262 mm, width 130 mm, height 210 mm

Weight:                                                                 6.3 kg
Shipping weight:                                                   8.5 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.