Plain trolley, hand-geared, extra sturdy, heavy design with brackets, weight 35, carrying capacity: 3000 kg - 00845
The device can be used for precise positioning and easy moving of larger loads by hand or electric hoist.
Adjustable for a beam range width from 76 mm up to 203 mm and various profiles. The rollers are designed for a maximum beam flange slope of 14 %. The pre-and fine tuning is done by washers with locknuts on the threaded beam which prevents slipping through a centric hoist mounting.
Application field:
As anchor point for a chain hoist or other hoists.
For mounting on a beam. (Please check carrying capacity/static load!)
Area of application: workshop, manufacturing, warehouse, assembly, etc.
Technical data:
Beam width: 76 mm to 203 mm
Total length from bracket to bracket: 344 mm
Total height: 338 mm
Max. width: 334 mm
Inner roller diameter: 110 mm
Outer roller diameter: 145 mm
Dimensions from bottom plain trolley to bottom eyelet: 190 mm
Flange slope: max. 14%
Hook size: width 45 mm, height 74 mm
Ball bearings
Colour: orange or blue
Easy beam width adjustment by spacers/washers.
In this fixing design the two halves of the trolley are perfectly assembled together and braced by locknuts. Therefore a twisting of the halves is not possible. There are simpler versions of trolleys where the halves are only connected by simple threaded rods without spacers/washers and are also not secured by locknuts. These versions are much less rigid.
Weight: 35 kg
Shipping weight: 38 kg
For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.