Round sheet metal punch and die, 22.5mm diameter, with draw stud, 00814

Ø22.5 mm round sheet metal punch and die, hole punch, splitting stamp

00814

Technical data:

Consists of punch, die and tension bolt

Draw stud: 1 stud 7/16" x 3/4" (approx. 11 mm diameter at one end and about 19 mm diameter at the other end)

For operation, the draw stud must be used with e.g. a hydraulic device which can be found in our shop, too.

Sheet metal punch and die, burnished tool steel: Ø 22,5 mm

Punching slugs will be cut in 3 pieces. So easy removal of metal waste is possible.

For 50 mm diameter at the latest and above, a hydraulically operated punch driver is recommended to use.

Cutting thickness for steel sheet: up to 3 mm

Not suitable for hardened steel plates

Weight of set:      approx. 0,5 kg
Shipping weight:     approx. 1 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.