10t hydraulic punch driver set, yellow/black pump
SYK-8AJu-01954
Hole shape: round, 22.5 mm - 61.5 mm
Technical data:
With hydraulic hand pump and hydraulic unit
Operating pressure: max. 700 bar
Cylinder stroke: 25 mm
Max. pressure force: 10t
Hose length between pump and cylinder: 80 cm
2 draw studs
1 stud 3/4" x 3/4" (approx. 19 mm diameter at both ends)
1 stud 7/16" x 3/4" (approx. 11 mm diameter at the one and 19 mm at the other end)
1 silver spacing
6 punch and dies, hole shape round, burnished tool steel: 22,5 mm, 28,3 mm, 34,6 mm, 43,2 mm, 49,6 mm, 61,5 mm
Punching slugs will be cut into three pieces, therefore easy waste removal
Cutting thickness for sheet steel up to 3 mm: 16.5 mm up to 60 mm
Cutting thickness for sheet steel up to 2 mm: 16.5 mm up to 115.5 mm
Cutting thickness for stainless steel up to 2 mm: 16.6 mm up to 60 mm
Not suitable for hardened steel plates
Weight of the set: 13 kg
Shipping weight: 15 kg
For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.