30t workshop press : manual + pneumatic drive
Hydraulic press welded version
cylinder unit can be moved sideways
SP30XHAMJ-02644
The ball bearing mounted cylinder unit can easily be moved sideways 120mm to the left and 120mm to the right and then fixed in any position.
Workshop press in absolute industrial quality. Its heavy steel construction makes it very stable. In addition, the frame is welded and therefore particularly torsion-resistant.
In similar, cheaper presses, the complete frame is only bolted together.
Drive-pump: 2-stage hand pump and an additional pneumatic drive, which can be operated via the foot pedal.
The 2-stage hand pump enables :
1. a faster feed with lower counter pressure
2. a slower, easily controllable feed at higher counterpressure, so pressing work can be carried out precisely.
Technical data:
Max. pressure force : 30t
Max. width : 850mm
Total height : 1855mm
Stroke of the cylinder : 180mm
usable width - working range inside : max. 540mm
usable height - working range : 0mm to 990mm
Support depth of the height-adjustable worktable ( crossbar ) is 192mm.
Total depth with base : 540mm Floor mounting possible
Crossbar can be fixed in 6 different positions (distance from hole to hole: 183mm).
The hydraulic unit can be moved laterally (ball bearing) in the upper guide area by 120mm to the left and by 120mm to the right.
Actuation/operation is either pneumatic or by hand pump.
Required air pressure for the pneumatic motor: approx. 8bar - 12bar
The pneumatic drive is particularly powerful.
Pressure indicator with manometer
Two prismatic supports are included in the scope of delivery.
Automatic piston retraction
Delivery is almost completely assembled, easy installation
Weight : 131 kg
Shipping weight : 153 kg
Self pickup is possible after telephone arrangement.
