Plain trolley, hand-geared, extra sturdy, heavy design with brackets, carrying capacity 1000 kg - 00647
The device can be used for precise positioning and easy moving of larger loads by hand or electric hoist. Adjustable for a beam range width from 64 mm up to 150 mm and various profiles.The rollers are designed for a maximum beam flange slope of 14%.
The pre-and fine tuning is done by washers with locknuts on the threaded beam which prevents slipping through a centric hoist mounting.
Application field:
As anchor point for a chain hoist or other hoists.
For mounting on a beam. (Please check carrying capacity/static load!)
Area of application: workshop, manufacturing, warehouse, assembly, etc.
Technical data:
Beam width: 64 mm to 150 mm
Flange slope: max. 14%
Hook size: width 30 mm, height 50 mm
Ball bearings
Colour may vary depending on delivery (blue/orange)
Easy beam width adjustment by spacers/washers.
In this fixing design the two halves of the trolley are perfectly assembled together and braced by locknuts.
Therefore a twisting of the halves is not possible. There are simpler versions of trolleys where the halves are only connected by simple threaded rods without spacers/washers and are also not secured by locknuts. These versions are much less rigid.
Weight: 12.5 kg
Shipping weight: 13.5 kg
For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.
