Please send me an email as soon as the product 10t hydraulic puller, inside + outside, for external pump, 00125 is available.
✓ Thank you for your interest.
We will send an email to as soon as the product 10t hydraulic puller, inside + outside, for external pump, 00125 is available.
Description
Hydraulically operated three jaw puller
HGP10LPJ-00125
The pulling force of this hydraulic puller is 10000 kg.
Usable in many positions, e.g. over head.
In the small image placed on the upper right corner of the product picture, the pressure connections of pump and cylinder of the puller are displayed. The matching pumps from our product range have the same small image in their product picture. This way the matching pumps are easily recognisable.
Technical data:
Opening range: up to 304 mm
The hydraulic stamp rod can be pushed out 150 mm.
The three jaws can be fixed in two different positions so it is suitable for a large field of application outdoor as well as indoor. The arms have two mountings, so the range of the hydraulic stamp can be extended to a total of 250 mm. If necessary, it can be used also with only two jaws, appropriate brackets are available. So a longer pulling distance is possible. A perfect application field is the removal of drive shafts for passenger cars.
The overall height of the puller housing including stamp with centring tip is 365 mm in the retracted state.
Weight: 18 kg
Shipping weight: 19 kg
For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.
