Hydraulic three jaws gear puller, bearing puller - 00130
The traction force of this hydraulic puller is 5000 kg.
Usable in many positions, e.g. over head.
Technical data:
Opening range: 30 mm to 200 mm.
The puller can be preadjusted to the required position over a range of 110 mm using a large threaded spindle.
The hydraulic stamp rod can be pumped out by 50 mm.
The three jaws can be fixed in two different positions at the puller, so it is suitable for a large application field outdoor as well as indoor.
If necessary, it can be used also with only two jaws, compatible mounting brackets exist.
The pumping rod mounting can be rotated individually, in order to adjust the most convenient working or pumping position of the tool.
A perfect application field is the removal of drive shafts for cars.
The overall height is 390 mm in retracted state.
The centring tip is screwed into the hydraulic puller from below.
A pumping rod is included in the scope of delivery
Weight: 6 kg
Shipping weight: 7 kg
For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.