50t shop press, bearing press, hydraulic press, hand pumping rod + pneumatic motor - 01438
Pump: can be operated by hand pump or pneumatic motor which can be operated by foot pedal.
The cylinder is laterally movable
The table height is adjustable.
You can adjust the pumping speed by a hand wheel. At low pressure you can pump up fast and then pump further with high pressure.
Industrial quality, the frame is welded at the top and thus extreme rigid.
For similar cheaper presses, the complete frame is simply screwed together.
Technical data:
Compressive force: 50t
Frame width: 910 mm
Total width incl. crank and hydraulic pump: 1300 mm
Frame width on the inside: 708 mm
Inner frame depth: 220 mm, the saddle has a depth of 248 mm
Vertical working range height: 68 mm - 920 mm
Depth: 800 mm
Height: 1950 mm
Cylinder stroke: 190 mm
Crossbar can be fixed in 7 different positions (distance of the holes centre-to-centre spacing: 140 mm)
The hydraulic part on the top can be moved laterally by a total of 220 mm.
The press is operated either hand pump or pneumatically
Required pressure for pneumatic motor: 6 - 8.5 bar
Pressure connection: 1/4" thread
The two v-blocks are included.
With pressure gauge
Automatic piston return
The product will be delivered partly disassembled, easy assembly and installation
Fixing to the floor possible
Weight: 293 kg
Shipping weight: 323 kg
For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.