Plain trolley, drive: gear with hand chain, heavy duty design, carrying capacity 500 kg - 01217
The device can be used for precise positioning and easy moving of heavy loads by hand or an electric hoist. One side of the trolley is operated by a hand chain. So the trolley can easily be moved on a beam.
Adjustable for a beam range width from 64 mm up to 140 mm and various profiles.
The trolleys are designed for a maximum beam flange slope of 14%.
The pre-and fine tuning is done by by spacers/washers and locknuts on the threaded rod which prevent lateral moving through centring.
Application field:
As anchor point for a chain hoist or other hoists.
For mounting on a beam. (Please check carrying capacity/static load!)
Area of application: workshop, manufacturing, warehouse, assembly, etc.
Technical data:
Beam width: 64 mm - 140 mm
Total length(from side to side): 222 mm
Total height (incl. eyelet): 200 mm
Max. width (incl spindle): 300 mm
Dimensions from roller bottom to bottom eyelet hole: 117 mm
The hand chain is hanging down on one side and has a length of 2850 mm.
Inner diameter of rollers: 57 mm
Flange slope: max. 14 %
Hook size: width 24 mm, height 37 mm
Ball bearings
Colour: orange
Easy beam width adjustment by spacers/washers.
In this fixing design the two halves of the trolley are perfectly assembled together and braced by locknuts.
Therefore a torsion of the halves is not possible. There are simpler versions of trolleys where the halves are only connected by simple threaded rods without spacers/washers and are also not secured by locknuts. These versions are much less torsion-resistant.
Weight: 11 kg
Shipping weight: 14 kg
For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.
