500kg plain trolley, heavy duty design, with brackets, N, 00832

Plain trolley, hand-geared, extra sturdy, heavy design with brackets, carrying capacity: 500 kg - 00832

The device can be used for precise positioning and easy moving of larger loads by hand or electric hoist.
Adjustable for a beam range width from 64 mm up to 140 mm and various profiles.
The rollers are designed for a maximum beam flange slope of 14 %.
The pre-and fine tuning is done by washers with locknuts on the threaded beam which prevents slipping through a centric hoist mounting.

Application field:
As anchor point for a chain hoist or other hoists.

For mounting on a beam. (Please check carrying capacity/static load!)

Area of application: workshop, manufacturing, warehouse, assembly, etc.

Technical data:

Beam width:   64 mm to 140 mm

Flange slope: max. 14 %

Hook size:       width 24 mm, height 34 mm

Ball bearings

Colour may vary depending on delivery (blue/orange)

Easy beam width adjustment by spacers/washers.

In this fixing design the two halves of the trolley are perfectly assembled together and braced by locknuts. Therefore a twisting of the halves is not possible.

There are simpler versions of trolleys, where the halves are only connected by simple threaded rods without spacers/washers and are also not secured by locknuts. These versions are much less rigid.

Weight:                 7 kg
Shipping weight:   9 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.