Round sheet metal punch and die, 28.3mm diameter, with draw stud, 00819

Ø28.3 mm round sheet metal punch and die, hole punch, splitting stamp

00819

Technical data:

Consists of punch, die and draw stud

Draw stud:                                  1 stud 3/4" x 3/4" (approx. 19 mm diameter at both ends)

For operation, the draw stud must be used with e.g. a hydraulic device which can be found in our shop, too.

Sheet metal punch and die, burnished tool steel: Ø 28,3 mm

Punching slugs will be cut in 3 pieces. So easy removal of metal waste is possible.

For 50 mm diameter at the latest and above, a hydraulically operated punch driver is recommended to use.

Cutting thickness in steel sheet:     up to 3 mm

Not suitable for hardened steel plates

Weight of set:                                 approx. 0,8 kg
Shipping weight:                             approx. 1.5 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.