Still in stock
5t plain trolley, hand-geared, carrying capacity 5000 kg - 00689
The device can be used for precise positioning and easy moving of heavy loads by hand or an electric hoist.
Adjustable for a beam range width from 88 mm up to 205 mm and various profiles.
The rollers are designed for a max. beam flange slope of 14%.
The pre-and fine tuning is done by washers with locknuts on the threaded beam which prevent lateral moving through centring.
Application field:
As anchor point for a chain hoist or other hoists.
For mounting on a beam. (Please check carrying capacity/static load!)
Area of application: workshop, manufacturing, warehouse, assembly, etc.
Technical data:
Beam width: 88 mm to 205 mm
Flange slope: max. 14%
Hook size: width 40 mm, height 60 mm
Ball-bearing mounted
Depending on the delivery, the colour is blue or orange
Easy beam width adjustment by spacers/washers.
In this fixing design the two halves of the trolley are perfectly assembled together and braced by locknuts.
Therefore a torsion of the halves is not possible. There are simpler versions of trolleys where the halves are only connected by simple threaded rods without spacers/washers and are also not secured by locknuts. These versions are much less torsion resistant.
Weight: 52,8 kg
Shipping weight: 55 kg
For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967
Customer pickup is possible after consultation.