20t hydraulic puller, puller, inside + outside, 00143

Hydraulically operated three jaws bearing puller - 00143

The pulling force of this hydraulic puller is 20000 kg.
Usable in many positions, e.g. over head.

Technical data:

Opening range: 50 mm up to 400 mm

The puller can be adjusted using a large threaded spindle over a path of 150 mm to the required position. The hydraulic stamp rod can be pumped out by 73 mm.

The pumping rod mounting can be rotated individually, in order to adjust the most convenient working or pumping position of the tool.

The three jaws can be fixed in two different positions at the puller, so it is suitable for a large application field outdoor as well as indoor.

If necessary, it can be used also with only two jaws, appropriate brackets are available.

A perfect application field is the removal of drive shafts of cars and trucks.

The overall height is 460 mm in retracted state.

The centring point is spring-loaded and can be pushed in under pressure, so that it is still centered, but not crushed.

A pumping rod is included.

Weight: 16 kg
Shipping weight: 18 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.