40A plasma cutter up to 12 mm material thickness, with HF ignition, complete with accessoires, PL40CJ - 02224
Technical data:
Input voltage: 230 Volt +/- 15% single phase
Nominal input voltage: 5.0 kVA
Frequency: 50/60 Hz
Cutting current: 10 - 40 A
Output voltage: 86 - 96 V
Duty cycle: 40A/60%
Fuse: 16A time-lag fuse
Max. cutting thickness for steel: 12 mm
Insulation class: F
Protection class: IP21S
Performance factor COS: >0,85
Efficiency: >80%
Average air consumption: 250 l/min
Dimesnions: 430 mm x 165 mm x 310 mm
Scope of delivery:
Plasma cutter hoses: approx. 4 m length
Earth cable: 3 m length
Transparent compresed air hose: 2.8 m length
Integrated pressure regulator
Pressure gauge
Various small parts (see picture)
Plasma cutter PL40CJ
Ready to use. You only need compressed air and a 230 V power socket
Cutting method: HF ignition
Modern IGBT technology
Gas/air follow up is choosable
Weight: 11 kg
Shipping weight: 14 kg
For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.