Slide hammer set, 3 pieces, puller, inside + outside, 00139

Puller set with 3 complete pullers for inside and outside use with matching slide hammer 

GPIE201J-00139

Suitable for outer and inner bearings

Technical data:

Inner diameter: from 15 mm up to 30 mm

Outer diameter: from 15 mm up to 80 mm

This puller is suitable for the removal of bearings and hubs.

The slide hammer has a weight of 2 kg and a complete length of 410 mm. It is screwed onto one of the the respective pullers. By the help of the sliding hammer you can tap down bearings of the shaft.

The three jaws of each puller can be pressed onto the bearing by a cone, so that they firmly enclose the bearing. So the arms are fixed and don't slip off. Now you can tap the bearing down with the slide hammer without making sure  the arms slip away of the bearing all the time. 

Shipping weight: 4 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.