Professional-Line
Oil extraction unit Oil collection trolley Waste oil collection unit
with 6 extraction probes 80 litre tank capacity
with compressed air drain
2285M-02709
The quality of our Professional-Line is even better than that of our standard products, which are already very well manufactured.
Even higher quality components are used compared to the standard oil drain tanks, the 5kg higher tare weight makes this particularly clear.
- The oil level hose on the side of the tank is effectively protected against damage by a sturdy cover.
- extremely stable, kink-proof hoses
-massive clamping device for height adjustment made of high-quality die-cast iron
- a manometer as pressure indicator for the boiler
- two circumferential beads in the boiler increase the stability of the boiler
-larger fixed castors for easier movement
You have 2 possibilities to change the oil:
1. oil extraction:
To do this, connect the compressed air to the top of the grey compressed air connection box, this creates negative pressure in the boiler , which sucks the oil out of the engine using one of the 6 extraction probes supplied.
Various newer Audi models and Smart models no longer have oil drain plugs, so the used oil must be extracted in this way.
2. Conventional draining via oil drain plug:
The oil collection trolley can be easily moved by the 4 rollers. Now the desired height of the collection tray can be adjusted steplessly.
The height of the collection tray is adjusted steplessly by pushing up/lowering the drain pipe.
After loosening the oil drain plug, the oil flows into the 80-litre reservoir.
The collection tray has its own strainer, so seals and screws do not get lost.
To empty the 80-litre reservoir, connect compressed air (compressor not included) to the second compressed air connection at the top.
The extraction is done with the help of compressed air (compressor not included in delivery) with approx. 0.7 - 1.0bar.
If you now close the ball valve at the top of the drain pipe, a slight overpressure is created in the boiler and the waste oil is pressed out of the boiler through the drain hose.
The bent end piece of the hose can be perfectly inserted into a waste oil barrel.
Make sure that the oil temperature is between 40°C and 60°C before emptying the boiler.
A level indicator is attached to the outside of the reservoir on the side, there you can easily check the level of the reservoir.
Technical details:
Waste oil collection trolley
Dimensions length : 500mm incl. handle
width : 400mm
Height of the collection tray incl. drain pipe steplessly adjustable
min. height of the collection tray : 1070mm
max. height of the collection tray : 1715mm
Ø collection tray : 400mm
Capacity collection tray : 16Litres
Capacity reservoir : 80Litres
Incl. level indicator
Operating temperature : 40-60°C
Compressed air connections ¼"
Air pressure for draining oil : 0,7 - 1,0bar
Air inlet pressure : 6-8bar
Vacuum pressure : 0 - -1bar
Ø Air consumption during extraction : 200L/min
5 ball valves , safety relief valve and ¼" air connections available
Manometer : display range from -1bar to +2,4bar
6 extraction probes in various lengths and diameters included:
Ø 5mm x L735mm (CU) = 1.9L/min
Ø 6mm x L735mm (CU) = 3,2L/min
Ø 6mm x L735mm (PVC) = 4,2L/min
Ø 8mm x L735mm (PVC) = 6,2L/min
Ø 5mm x L735mm (PVC) = 3,7L/min
Ø 7mm x L1030mm (PVC) = 5,2L/min
Emptying via compressed air
2 swivel castors Ø 75mm + 2 fixed castors Ø160mm allow easy movement of the trolley.
Weight : 22kg
Shipping weight : 27kg
Self-collection is possible after telephone arrangement
00325