Pneumatic planishing hammer
PPH500J-02240
Pneumatic drive
The frame can be filled with sand for vibration dampening
Can be mounted on a table
3 pressure pieces with variant radii in the scope of delivery
The lower mounting of the anvil is height adjustable
Operatied by foot pedal. Freehand use possible.
Technical data:
Max. Material thickness: 1.2 mm
Insertion depth: 500 mm
Pressure pieces: 1", 2" ,3" radius bulge
Frequency: 875 - 1350 impacts per minute
Max. operating pressure: 3.5 bar - 6.9 bar
Average air consumption: 200 l/min
Compressed air connection: 1/4" plug nipple
Hose length for foot pedal: 1000 mm
Connection hose length pedal-machine: 2500 mm
Max. distance vom lower anvil to upper anvil: 100 mm
The frame is made of thick-walles, welded tubes. These won´t bend even under full load
Delivered partly assembled. Easy assembly possible
Boreholes for mounting to the floor
Dimensions (B x T x H): 710 mm x 400 mm x 1220 mm
Weight: 23 kg
Shipping weight: 28 kg
For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.