Oil collection trolley Waste oil collection unit with 90 litre tank capacity
With compressed air drain
TRG2094T-02695
The oil collecting trolley is easy to move due to the 4 castors. Now you can set the desired height of the collecting tray steplessly.
The height of the collection tray is steplessly adjusted by pushing up/lowering the drain pipe.
After loosening the oil drain plug, the oil flows into the 90-litre reservoir. Before doing this, however, you must open the stopcock underneath the collection tray so that the oil can flow into the container.
The collection tray has its own strainer, so seals and screws do not get lost.
To empty the 90-litre reservoir, proceed as follows:
First close the stopcock at the top of the collection tray.
Now connect the compressed air to the compressed air connection at the top of the tank at 0.5 bar, please regulate your pressure accordingly at your pressure regulator.
The maximum permissible operating pressure is 0.8 bar.
Now slowly open the tap at the bottom of the boiler where the drain hose is mounted, the waste oil will now flow out through the drain hose.
The curved end piece of the hose can be perfectly hooked into a waste oil barrel.
The drain hose is mounted on the outside of the reservoir on the side, where you can easily read the level of the reservoir.
Technical details:
Waste oil collection trolley
Dimensions length : 540mm incl. handle
Width : 380mm
Height of the collection tray incl. drain pipe steplessly adjustable
min. height of the collection tray : 1250mm
max. height of the collection tray : 1920mm
Ø collection tray : 485mm
Depth of collection tray : 123mm
Capacity reservoir : 90Litres
Incl. level indicator
Safety relief valve and ¼" compressed air connection included
Emptying via compressed air
2 swivel castors with Ø 70mm + 2 fixed castors with Ø165mm allow easy movement of the trolley.
Weight : 21kg
Shipping weight : 26kg
Self-collection is possible after telephone arrangement