Still in stock
3t plain trolley, hand-geared, carrying capacity: 3000 kg - 00167
The device can be used for precise positioning and easy moving of heavy loads by hand or an electric hoist.
Adjustable for a beam range width from 88 mm up to 168 mm and various profiles.
The rollers are designed for a maximum beam flange slope of 14%.
The pre-and fine tuning is done by washers with locknuts on the threaded beam which prevent lateral moving through centring.
Application field:
As anchor point for a chain hoist or other hoists.
For mounting on a beam. (Please check carrying capacity/static load!)
Area of application: workshop, manufacturing, warehouse, assembly, etc.
Technical data:
Beam width: 88 mm - 168 mm
Total length: 320 mm
Total height: 295 mm
Max. width: 300 mm
Inner diameter of rollers: 95 mm
Outer diameter of the rollers: 130 mm
Dimension from roller bottom to bottom eyelet hole: 164 mm
Flange slope: maximum 14%
Hook size: width 34 mm, height 59 mm
Ball bearings
Colour: orange
Easy beam width adjustment by spacers/washers.
In this fixing design the two halves of the trolley are perfectly assembled together and braced by locknuts.
Therefore a torsion of the halves is not possible. There are simpler versions of trolleys where the halves are only connected by simple threaded rods without spacers/washers and are also not
secured by locknuts. These versions are much less torsion-resistant.
Weight: 34,5 kg
Shipping weight: 37 kg
For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.