16" Axial fan, turbo fan, 10360 m³/h
EFC120X-16L - 00968
High performance axial fan for ventilation
Usage: wall-mounted or free standing use on the floor
Wall mounting:
It is possible to mount the fan on a wall. On the photo you can see the boreholes for the mounting screws.
There are 4 holes each on the front and the back plate.
In the small additional photo at the upper right corner you can see a little black circle. There one of the four spots is marked where you can put a mounting screw through either the front plate or the back plate.
You can easily press these prepunched spots out for putting the mounting screws through the particular holding plate.
In the additional photo, which shows the back, you can see a black metal ring. This ring can be inserted in the wall hole and then the fan can be fixed to the wall.
This metal ring has a diameter of 405 mm.
The hole on the wall should be at least 405 mm in size.
The dimensions of the hole pattern for mounting the 4 screws is 360 mm x 360 mm
Free standing use:
If you want to use the fan standing on the ground, you should put a venting hose over the black metal ring.
There are 4 drilled holes on the ring, for fixing a hose onto the ring.
With a hose you can transport the vented air to the outside or into another room.
Additionally it has to be clear that no one can reach into the fan from the back through this hose.
Technical data:
Power: 1200 W
Voltage: 220 V
Speed: 2900 rpm
Frequency: 50 Hz
Air flow capacity: 10360 m³ per hour
Fan diameter inside: 400 mm
Cable length: approx. 10 m
Dimensions (length x width x height): 460 mm x 460 mm x 370 mm
Weight: 28 kg
Shipping weight: 35 kg
For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.
