Telescope floor jack, garage jack, lifting capacity 40t/20t/10t - 01168
3 stages telescope cylinder: 1st stage: 40t; 2nd stage: 20t, 3rd stage: 10t
This hydraulic floor jack is powered using a built-in pneumatic motor. The pneumatic engine facilitates frequent pumps in daily workshop routine. To run the pneumatic motor, a compressor is necessary which is not included in the scope of delivery. The compressed air operates the built-in pneumatic motor. This compressed air engine pumps the hydraulic oil into the cylinder.
The shunting bar can be adjusted in inclination and locked in three different positions. The button to activate the motor and lowering the jack is located at the end of the bar. If you turn clockwise, the cylinder will rise. By turning anti-clockwise, the cylinder will lower.
In the cylinder there is a screwable thread with a mounting for 2 pressure pieces. The shunting bar can be folded by nearly 180°. So you can reach wide under the vehicle
Technical data:
Lifting capacity and height: 1st stage 40t: 57 mm
2nd stage 20t: 49 mm
3rd stage 10t: 56 mm
Min. height: 125 mm
Max. stroke of the cylinder: 162 mm
2 pressure pieces: 1 x 45 mm + 1 x 75 mm: both can be put together
Max. height: 125 mm + 162 mm cylinder stroke + 45 mm pressure piece = 332 mm
Max. height: 125 mm + 162 mm cylinder stroke + 75 mm pressure piece = 362 mm
Max. height: 125 mm + 162 mm cylinder stroke + 75 mm + 45mm = 407 mm
Width of the jack: in the front area 180 mm
Width of the jack: in the rear area at the castors 310 mm
Length of the jack: 855 mm
Length of the pumping rod: 1290 mm
Castors: 2 fixed castors at the rear
Saddle: 1st stage 115 mm diameter
2nd stage 88 mm diameter
3rd stage 70 mm diameter
Weight: 40 kg
Shipping weight: 45 kg
For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.