Sandblasting gun with recovery, 6 pieces set - 01174

For direct aspirating of blasting material out of the reservoir. So it is guaranteed, that a sufficient amount of blasting material is aspiratede. Suitable for removing of rust, paint etc. of bigger areas and hard to reach places.

Technical data:

Connection thread:           1/4"

Operating pressure:          3-4 bar

Nozzle diameter:               5.5 mm

Average air consumption: 170 l/min

Grain size:                         0.5 - 0.8 mm

4 different nozzles

Tank volume:                     0.85 litres

Incl. 1 kg blasting material in lockable bin

1 collection bag for blasting material

Blasting material is aspirated from the bin 

The compressed air hose can be screwed directly. If you want to use a quick coupling, you additionally need a 1/4" connection piece (not included)

Weight:                                2 kg
Shipping weight:                  3 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.

1200 litres sand blasting cabinet, with extraction device, 2 very large front doors, SB120AJ - 01580

Perfectly suitable for very large parts 

Comprehensive features:

Operation by 2 foot pedals (one on the front and the other at the back)

Powder coated steel

2 very large front doors for easy loading (1130 mm x 570 mm each)

Both front doors have a rubber sealing

The doors are held by 2 lateral gas shock absorbers each

Integrated extraction device (220 V, 1200 W, with interchangeable fliter) at the rear side

2 moveable sand blasting gun with 6 interchangeable ceramic nozzles in total

The blasting pressure can be adjusted by a switch an controlled by pressure gauge

Gloves, fixed to the cabinet

Internal table grid 

Very economical because of circulating blasting material

Window in the front door

15 replacements foils each for window and lighting in total

4 fluorescent tube in an extra housing with window (4x26 W neon tubes, 220 V, 16 mm diameter, length 890 mm)

Technical data:

Connection:                                                 220 V, 50 Hz, 1200 W

Volume:                                                       1200 litres

Operating pressure:                                    5.5 bar - 8.6 bar

Average air consumption:                           680 litres/min

2 x air inlet:                                                 3/8"

Incl. 2 pressure reducers and pressure gauge

Inner dimensions (width x depth x height):  1160 mm x 1280 mm x 450 mm front - 820 mm middle

Outer dimensions (width x depth x height):  1500 mm x 1370 mm (incl. extraction device) x 1830 mm

Weight:                                                         200 kg
Shipping weight:                                           245 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.

990 litres sand blasting cabinet, with extraction device, 1 very large front door, SBC990AJ - 01650

Perfectly suitable for very large parts 

Comprehensive features:

Operation by foot pedal 

Powder coated steel

Very large front door for easy loading ( 960 mm x 740 mm)

Front door has a rubber sealing

2 lateral gas shock absorbers

Integrated extraction device (220 V, 1100 W, with interchangeable fliter) at the rear side

1 moveable sand blasting gun with 3 interchangeable ceramic nozzles 

The blasting pressure can be adjusted by a switch an controlled by pressure gauge

Gloves, fixed to the front door

Internal table grid 

Very economical because of circulating blasting material

Window in the front door

10 replacements foils each for window and lighting in total

4 fluorescent tubes in an extra housing with window (4x26 W neon tubes, 220 V, 16 mm diameter, length 890 mm)

Technical data:

Connection:                                                 220 V, 50 Hz, 1210 W

Volume:                                                       990 litres

Operating pressure:                                    5.5 bar - 8.6 bar

Average air consumption:                           680 litres/min

2 x air inlet:                                                 3/8"

Incl. pressure reducer and pressure gauge

Inner dimensions (width x depth x height):  1160 mm x 870 mm x 450 mm vorne - 820 mm middle

Outer dimensions (width x depth x height):  1270 mm x 1230 mm (incl. extraction device) x 1760 mm

Weight:                                                         160 kg
Shipping weight:                                           198 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.

Air eraser, mini sandblasting gun - 01946

It is especially suitable for cleaning, paint removal, matting, derusting and engraving on glass.
Application fields: Restorations, airbrush work, engraving of glass, model construction, handicrafts and many others.
When working with this tool protective equipment (safety glasses and a dust mask) must be weared!
 

Scope of delivery:

1 sandblasting gun with matted tank

Fabric connection tube with an integrated water separator; length: 1.85 m

1 dust mask

1 chromed wall mounting

1 tank of 150 gr blasting abrasive
 

Technical data:

Total length of the gun: 135 mm

Noozle diameter:           0,5 mm        

Operating pressure:       2- 4.4 bar

Tank capacity: 15 cm³ blasting abrasive (grit size 63-106 mikro)

The lid (incl. sealing) of the tank is screwable. On the top there is the adjusting screw for the required amount of blasting abrasive.

Air hose connection size: 1/8"

 

Weight:               1.5 kg
Shipping weight:    2 kg

 

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.

Blasting material: corundum-aluminium, F36, SBSF36COJ - 01644

This blasting material is especially suitable for removing of paint layers, scale and rust. Additionally for corrosion protection

Highly durable and sharp grains

Technical data:

F36 grain size = 0.35 mm - 0,70 mm

Colour may vary depending on delivery

Weight:                25 kg
Shipping weight: 27 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.

Blasting material: glass beads 25 kg, SBS100200GPJ - 01640

These glas beads are especially suitable for cleaning and polishing non-ferro metals like aluminium or stainless steel.

Technical data:

Grain size: 100 - 200 micron

Weight:               25 kg
Shipping weight: 27 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.

Blasting material: Sodium carbonate, grain size 0.1 mm - 0.3 mm, 25 kg bag - 01643

This blasting material is based on synthetic high quality natrium carbonate (NaHCO3). Because of its low hardness, it is perfectly suitable for various applications without damaging the blasted surface. This blasting material is very eco-friendly because it is non-toxic an very safe to use. It is water soluble and can even enter the sewage system. Therefore, it is often used for cleaning of buildings and monuments.

Suitable e.g. for: Stone, glass, aluminium, stainless steel, fibreglass, wood, plastic, ball bearings, hydraulic cylinders, pump, electirc motors

Chemical structure: NaHCO3

Spezifications:

Specific weight: 2.2 kg/litre

Bulk density:      0.5 - 1.2 kg

Hardness Mohs: 2.0 - 3.0

Hardness HRC:  47

Grain shape:       angular

Grain size:          0.1 mm - 0.3 mm

Weight:                 25 kg
Shipping weight:   27 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.

Gloves for sandblasting cabinet, replacement gloves, SB1GLJ - 01664

Replacement gloves for big sandblasting cabinets

You can find our sandblasting cabinets under the following article numbers:

Art. No. 01559 Sandblasting cabinet 420 litres

Art. No. 01560 Sandblasting cabinet 420 litres

Art. No. 01650 Sandblasting cabinet 990 litres

Art. No. 01580 Sandblasting cabinet 1200 litres

Technical data:

Extra rough surfaces for perfect grip 

One pair of gloves is delivered

Glove port diameter 175 mm

Material thickness: 1 mm

Total length: 590 mm

Colour: green/black

Weight:                0.5 kg
Shipping weight:     1 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.

Sandblasting gun with 1000 cm³ tank volume - 01186

For direct suction of blasting material from bulk containers. 

Thus, it is ensured that always a sufficient amount of blasting material is available. Suitable for removing rust, paint, etc. for large and hard to reach places. 

Technical data:

Connection thread:                   1/4"

Operating pressure:                  3 - 3.5 bar

Max. pressure:                          6 bar

Nozzle diameter (outlet):           6 mm

Nozzle diameter (inlet/suction): 3 mm

Average air consumption:          170 l/min

Tank volume:                              1000 cm³

Blasting material is sucked directly out of the container

1/4" connection thread for quick coupling is uncluded in the scope of delivery

Weight:                                         2 kg
Shipping weight:                           3 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.