Precision cable cutter, cable cutter, cable plier 150 mm² - 00346

By pressing an operating element the opening of the ratchet mechanism is possible. Now you can insert the cable and close the ratchet mechanism until it has contact with the cable.
Now you can easily cut the inserted cable bit by bit by opening and closing the handles, similar to a pumping motion.
Because of this design, the cutter can be built very compact and so it is space saving and can be used even in hard to reach places.
 

Technical data:

Length: 260 mm

For cable cross sections up to 150 mm², suitable for copper and aluminium cables

Cable diameters up to 22 mm fit into the pliers

Handy and ideal for copper and aluminium cables

Safe work through optimal power transmission

Hardened cutting head

Tough rubber sheathed, ergonomic handles

Weight:            0.5 kg
Shipping weight: 1 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.

Cable cutter, cable plier - 00345

Technical data:

Length: 345 mm

For cable cross sections up to 120 mm²

Handy and ideal for copper and aluminium cables

Cable diameters up to 22 mm fit into the pliers

Safe work through optimal power transmission

Hardened cutting head

Tough rubber sheathed, ergonomic handles

Weight:               1.5 kg
Shipping weight: 2.5 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.

Telescope cable cutter, cable cutter, cable plier up to 250 mm² - 00344

This is equivalent to a cable diameter of approx. 18 mm

Technical data:

Length in the extended state: 565 mm

Length in the retracted state: 415 mm

Length:                                   415 mm - 565 mm

In the photo you can see the pliers in the extended and retracted state.

By turning the handles anti-clockwise the telescope is released. Then you can extend or retract the handles and by turning clockwise it can be locked again.

For cable cross sections up to 250 mm²

Handy and ideal for copper and aluminium cables

Safe work through optimal power transmission

Hardened cutting head

Tough rubber sheathed, ergonomic handles

Weight:               2.5 kg
Shipping weight: 3.5 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.

Hydraulic cable cutter, cable plier, cable diameter up to 100 mm - 00343

The hydraulic pump required for this cable cutter can also be found in our shop.
The cutter has a return spring that retracts the cutting edge back to its original position after opening the valve.
The cutter can be openend to easily insert the cable. Integrated overpressure valve.

Technical data:

Max. required pressure:                                           700 bar

Compressive force:                                                   6t

Cutting diameter for telephone cables:                    100 mm diameter

Cutting diameter for aluminium and copper cables: 75 mm diameter

Not suited for steel cables

Dimensions:

Length:                                                                        508 mm

Width:                                                                          150 mm

Height:                                                                         90 mm

Weight:                                                                            8.2 kg
Shipping weight:                                                            10.5 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.

Cable cutter, cable plier 500 mm² - 00342

Technical data:

Length: 810 mm

For cable cross sections up to 500 mm²

Cable diameters up to 50 mm fit into the pliers

Handy and ideal for copper and aluminium cables, not suited for steel bars or steel cables

Safe work through optimal power transmission

Hardened cutting head

Tough rubber sheathed, ergonomic handles

Colour may vary depending on delivery (black-green/yellow-red)

Weight:               3 kg
Shipping weight: 4 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.

120 mm² telescope-cable cutter, cable plier - 00341

Technical data:

Length in the extended state: 400 mm

Length in the retracted state: 300 mm

Length:                                   300-400 mm

In the photo you can see the pliers in the extended and retracted state.

By turning the handles anti-clockwise the telescope is released. Then you can extend or retract the handles and by turning clockwise it can be locked again.

For cable cross sections up to 120 mm²

Cable diameters up to 20 mm fit into the pliers

Handy and ideal for copper and aluminium cables

Safe work through optimal power transmission

Hardened cutting head

Tough rubber sheathed, ergonomic handles

Weight:             1.25 kg
Shipping weight: 2.5 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.

Cable cutter, cable plier 120 mm² - 00340

Technical data:

Length:                                     320 mm

For cable cross sections up to 120 mm²

Handy and ideal for copper and aluminium cables

Cable diameters up to 25 mm fit into the pliers

Safe work through optimal power transmission

Hardened cutting head

Tough rubber sheathed, ergonomic handles

Shipping weight: 2 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.

SENECA - gripping pliers, 255 mm with quick release lever, wide design - 00590

The ideal plier for fastening and holding of workpieces which have to be welded.

Technical data:

Length: 255 mm

Safe gripping of round, profiled and flat materials

One-hand operation

High clamping pressure by toggle lever transmission

Chrome vanadium steel

Shipping weight: 1.5 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.

SENECA - gripping pliers 220 mm with quick release lever - 00591

Scope of application:

The ideal plier for fastening and holding of workpieces which have to be welded.

Technical data:

Length: 220 mm

Safe gripping of round, profiled and flat materials

One-hand operation

High clamping pressure by toggle lever transmission

Chrome vanadium steel

Shipping weight: 1.5 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.

Precision cable cutter 400 mm², cable cutter, cable plier, up to 400 mm² cable cross section, with ratchet function - 00630

The ratchet mechanism can be opened easily. You can now insert the cable in the open ratchet mechanism and it can be closed again. Now you can cut the cable into pieces with little effort by opening and closing the two yellow arms (like a pump). Through this mechanism the cable cutter can be built very compact. It is thus extremely space-saving and can be used even in hard to reach places.

Technical data:

Length: 360 mm

Suitable for cable cross-section up to 400 mm²

Suitable for cable diameter up to 40 mm 

Handy and ideal for aluminium and copper cables

Safe work through optimal power transmission

Hardened cutting head

Tough rubber sheathed ergonomic handles

Weight:                1.25 kg
Shipping weight:    1.5 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.