Pressure gauge for a 20t shop press - 00984

This pressure gauge is a replacement part for a 20t shop press

The display range is between 0 - 28t

This range refers to a inner cylinder diameter of 60 mm. The inner cylinder diameter is usually bigger than the diamter of the extended piston.

The displayed 28t on the scale are equivalent to a pressure of 1000 bar.

Technical data:

Bourdon-tube pressure gauge oil damped

Diameter of the pressure gauge: 108 mm

Housing:                                        steel

Connection on the lower side

Pointer mechanism:                       brass

Pressure measuring for fluid and gaseous materials

Weight:                                               1 kg
Shipping weight:                              1.5 kg 

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.

Pressure gauge 12t shop press

00985

This pressure gauge is a replacement part for a 12t shop press

Technical data:

The display range is between 0 - 16t

This range refers to a inner cylinder diameter of 45 mm. The inner cylinder diameter is usually bigger than the diamter of the extended piston.

The displayed 16t on the scale are equivalent to a pressure of 1000 bar.

Bourdon-tube pressure gauge oil damped

Diameter of the pressure gauge: 108 mm

Housing:                                        steel

Connection on the lower side

Pointer mechanism:                       brass

Pressure measuring for fluid and gaseous materials

Weight:                                                1 kg
Shipping weight:                               1.5 kg 

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.

Pressure piece set, 11 pieces with wall mounting for shop press, hydraulic press, bearing press - 01423

This set is suitable for all our blue and red 20t and 30t shop presses

The adaptor in the front left of the picture can be fixed to the presses directly under the hydraulic piston.

In this adaptor you can insert the pressure pieces.

Scope of delivery:

Adaptor, can be fixed to the press

8 different pressure pieces with following capacities and diameters:

2t         Ø 10 mm 

3t         Ø 11,8 mm 

8t         Ø 15,8 mm

12t       Ø 17,8 mm

14t       Ø 19,9 mm

16t       Ø 21,8 mm 

18t       Ø 24,9 mm

20t       Ø 30 mm

Template for the 8 pressure pieces

Wall mounting

Weight:                  8 kg
Shipping weight: 9.5 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.

Pressure gauge for a 20t shop press - 01454

This pressure gauge is a replacement part for a 20t shop press

The display range is between 0 - 28t

This range refers to a inner cylinder diameter of 60 mm. The inner cylinder diameter is usually bigger than the diamter of the extended piston.

Technical data:

Bourdon-tube pressure gauge oil damped

Diameter of the pressure gauge: 108 mm

Housing:                                        steel

Connection on the rear side

Pressure measuring for fluids and gaseous materials

Pointer mechanism:                       brass

Weight:                                               1 kg
Shipping weight:                              1.5 kg 

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.

Compressed air hose with 1/4" connections, length 1350 mm, wit manual push button and angle piece, HA1SJ - 02081

Technical data:

Inner hose diameter:      8 mm

Outer hose diameter:     15.5 mm

Operating pressure:        max. 20 bar

Length:                            1350 mm

Operating temperature:  -40°C - +60°C

The push button facilitates operating and controlling of the air flow

The angle piece is rotatable by 360°. The position of the hose is freely selectable

Fully grouted with 1/4" connections (1/4" is the common compressor size)

Very flexible rubber hose 

Weight:                            0.8 kg
Shipping weight:              1.5 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.

Pressure gauge for a 20t shop press, bottom connection, TY20002T - 00288

This pressure gauge is a replacement part for a 20t shop press

Technical data:

Display range: 20t (red zone up to 30t)

This range refers to a cylinder diameter of 48 mm. 

Bourdon-tube pressure gauge oil damped

Diameter of the pressure gauge: 108 mm

Housing:                                        steel

Connection on the bottom 

Pressure measuring for fluid and gaseous materials

Pointer mechanism:                       brass
 

Weight:                                               1 kg
Shipping weight:                              1.5 kg 

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.

Pressure gauge for 12t shop press, bottom connection 

TY12002T-02230

This pressure gauge is a spare part for 12t shop press

Technical data:

Display range:       12t (red area up to 22t)

This range refers to a inner cylinder diameter of 45 mm. 

Bourdon-tube pressure gauge oil damped

Housing diameter:  108 mm

Housing:                  steel

Connection:             bottom

Pressure measuring for fluid and gaseous materials

Pointer mechanism: brass

Weight:                                                1 kg
Shipping weight:                               1.5 kg 

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.