40A plasma cutter up to 12 mm HF ignition, PL40CJ, 02224

40A plasma cutter up to 12 mm material thickness, with HF ignition, complete with accessoires, PL40CJ - 02224

Technical data:

Input voltage:                                230 Volt +/- 15% single phase

Nominal input voltage:                  5.0 kVA

Frequency:                                    50/60 Hz

Cutting current:                             10 - 40 A

Output voltage:                              86 - 96 V

Duty cycle:                                     40A/60%

Fuse:                                              16A time-lag fuse

Max. cutting thickness for steel:     12 mm

Insulation class:                               F

Protection class:                              IP21S

Performance factor COS:                >0,85

Efficiency:                                        >80%

Average air consumption:               250 l/min

Dimesnions:                                    430 mm x 165 mm x 310 mm

Scope of delivery:

Plasma cutter hoses:                      approx. 4 m length

Earth cable:                                    3 m length

Transparent compresed air hose:  2.8 m length

Integrated pressure regulator

Pressure gauge

Various small parts (see picture)

Plasma cutter PL40CJ

Ready to use. You only need compressed air and a 230 V power socket

Cutting method: HF ignition

Modern IGBT technology

Gas/air follow up is choosable

Weight:                                           11 kg
Shipping weight:                             14 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.