30t/15t floor jack, garage jack with pneumatic drive, T30-2ML, 01693

Telescope floor jack, garage jack, lifting capacity 30t/15t - 01693

2 stages telescope cylinder: 1st stage: 30t   2nd stage: 15t

This hydraulic floor jack is powered using a built-in pneumatic motor. The pneumatic engine facilitates frequent pumps in daily workshop routine. To run the pneumatic motor, a compressor is necessary which is not included in the scope of delivery. The compressed air operates the built-in pneumatic motor. This compressed air engine pumps the hydraulic oil into the cylinder.

The shunting bar can be adjusted in inclination and locked in three different positions. The button to activate the motor and lowering the jack is located at the end of the bar. If you turn clockwise, the cylinder will rise. By turning anti-clockwise, the cylinder will lower.

In the cylinder there is a screwable thread with a mounting for 2 pressure pieces. The shunting bar can be folded by nearly 180°. So you can reach wide under the vehicle

Technical data:

Lifting capacity and height:   1st stage 30t: 74 mm

                                              2nd stage 15t: 68 mm

Min. height:                           150 mm

Max. stroke of the cylinder:   142 mm

2 pressure pieces:                 1 x 45 mm + 1 x 75 mm: both can be put together

Max. height:                           150 mm + 142 mm cylinder stroke + 45 mm pressure piece =  337 mm

Max. height:                           150 mm + 142 mm cylinder stroke + 75 mm pressure piece =  367 mm

Max. height:                           150 mm + 142 mm cylinder stroke + 75 mm + 45mm         =  412 mm

Width of the jack:                   in the front area 175 mm

Width of the jack:                   in the rear area at the castors 265 mm

Length of the jack:                 425 mm

Length of the pumping rod:   1250 mm

Castors:                                 2 fixed castors at the rear

Saddle:                                  70 mm diameter

Weight:                                   31 kg
Shipping weight:                     35 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.