Pneumatic barrel pump, transmission ratio 1:1, total length 640 mm, OP18AW - 01658
Insertion depth can be adjusted by a rubber hose (not included in the scope of delivery)
At the lower end, you can fasten a rubber hose. So any desired insertion depth can be reached.
The diameter at the lower end of the pump to fasten the hose is approx. 29 mm.
This barrel pump is suitable for following fluids:
Motor oil, synthetic oil, hydraulic oil, gear oil, servo oil
Suitable for oils up to 120 SAE and for barrels with a 2" thread
Technical data:
Barrel size: 50 - 60 kg with 2" thread
Transmission ratio 1:1 (Example: at 2 bar pressure, the oil is pumped with 2 bar)
Compressed air inlet: 5 - 8 bar
Max. oil pressure of pumped oil: 8 bar
Air consumption: 8 bar 100 l/min
Air consumption without load (free flow rate): 18 l/min
Air inlet connection: 1/4" NPT internal thread in the housing. A 1/4" quick coupling is screwed in
Oil outlet connection: 1/2" BSPT external thread (male)
Self priming
Max. usable length of the immersion tube: 270 mm
Height adjustable screw connection (the 2" connection can be moved along the immersion pipe)
Max. total length: 640 mm
Weight: 4.5 kg
Shipping weight: 6 kg
For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.