Currently unavailable
Floor jack, garage jack, lifting capacity 22000 kg - 00964
This hydraulic floor jack is powered by a built-in pneumatic motor. The pneumatic mozor facilitates frequent pumps in daily workshop routine. To run the pneumatic motor, a compressor is necessary which is not included in the scope of delivery.
The compressed air operates the built-in pneumatic motor. It pumps the hydraulic oil into the cylinder.
The rod can be adjusted in inclination and locked in three different positions. The switch to activate the motor is located at the end of the rod. By turning it right, the cylinder comes out and by turning it left, the cylinder is lowered again.
In the cylinder there is a threaded sppindle with a mounting for 3 attachements.
Technical data:
Lifting capacity: 22000 kg
Min height: 223 mm + 20 mm attachment = 243 mm
Max. stroke of the hydraulic cylinder: 120 mm
3 different pressure pieces can optionally be attached on the cylinder: 1 x 20 mm, 1 x 60 mm, 1 x 100 mm
Max. height: 223 mm + 20 mm attachment + 120 mm stroke + 100 mm spindle = 463 mm
Max. height: 223 mm + 100 mm attachment + 120 mm stroke + 100 mm spindle = 543 mm
Screwable threaded spindle the cylinder: up to 100 mm
Operating pressure of the pneumatic engine: 6.9 bar - 8.3 bar
Compressed air inlet thread size: 1/4" NPT
Width at the front: 210 mm
Width in the rear area at the castors: 280 mm
Total length incl. rear castors: 515 mm
Pumping rod length: 1230 mm
Castors: 2 fixed castors
Weight: 33 kg
Shipping weight: 35 kg
For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.