30t hydraulic puller, inside + outside, for external pump, 00662

30t hydraulic puller, three arms - 00662

The pulling capacity of this hydraulic puller is 30000 kg
Works in all imaginable positions, such as over head.
You find the matching hydraulic pumps in our shop.

In the small image placed on the upper right corner of the product picture, the pressure connections of pump and cylinder are displayed. The matching cylinders from our product range have the same small image in their product picture. This way the matching pump for this puller is easy recognisable

Technical data:

Opening range (max. pulling diameter):          up to 450 mm

Max. pulling length:                                          230 mm

The hydraulic stamp can be pumped out over 60 mm.

The hydraulic device can be adjusted up to 100 mm by the large external thread.

The three jaws can be fixed in two different positions at the puller. It can be individually adjusted over a very large area and is usable on the inside and outside.

If necessary, it can also be used with 2 jaws, matching mountings are available.

So gear wheels can be pulled over large distances from a shaft. A perfect application field is the removal of drive shafts for cars.

Weight:                                                             14 kg
Shipping weight:                                               19 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967
Customer pickup is possible after consultation.