Hydraulic pump for shop presses, manually, 1000cm³ oil tank, silver, 00047

Hydraulic pump, hydraulic hand pump, e.g. for shop presses, max. pressure: 500 bar - 00047

This hydraulic pump is suitable e.g. for single-acting hydraulic cylinders etc.
This pump is a new replacement part for large hydraulic presses thus a pump rod is unfortunately not included. 
But you can operate the hydraulic system by hand, the according pumping devices are attached to the pump.
For this purpose a rod with 22 mm diameter is suitable.
For lowering simply open the valve and the oil flows back into the hydraulic pump.
The pump housing has four threaded boreholes on the rear side in order to bolt the unit e.g. to hydraulic presses etc.
A connection for a hydraulic hose is located on the back of the housing.
The pump is operated in a standing position where the reservoir is located on top side and the pump section is on the bottom side.

Technical data:

Max. pressure:          500 bar

Tank - oil volume:      1000 cm³

Dimensions:               height: 450 mm, width: 195 mm, depth: 100 mm

Weight:                        6.5 kg
Shipping weight:             8 kg

For any inquiries please don't hesitate to contact us by phone at the following number: +49 2162 / 353967.
Customer pickup is possible after consultation.